McDonnell Douglas MD-11F

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 707, 717, and 727 airplanes; Model DC-8, DC-9, and DC-10 airplanes; Model MD-10 and MD-11 airplanes; Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 airplanes; and Model MD 90-30 airplanes. This AD was prompted by the determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G Lower C- Band) while operating in Canadian airspace, and the determination that during approach, landings, and go-arounds, as a result of this interference, certain airplane systems may not properly function, resulting in increased flightcrew workload while on approach with the flight director, autothrottle, or autopilot engaged, which could result in reduced ability of the flightcrew to maintain safe flight and landing of the airplane. This AD requires revising the existing airplane flight manual (AFM) to incorporate limitations prohibiting certain operations requiring radio altimeter data when operating in Canadian airspace. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model MD-11 and MD-11F airplanes. This AD was prompted by an accident where the left-hand engine and pylon detached from the airplane during takeoff. This AD prohibits further flight until the airplane is inspected and all applicable corrective actions are performed using a method approved by the FAA. The FAA previously sent an emergency AD to all known U.S. owners and operators of these airplanes. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is superseding Emergency Airworthiness Directive (AD) 2025-23-51, which applied to all The Boeing Company Model MD-11 and MD- 11F airplanes. Emergency AD 2025-23-51 was prompted by an accident where the left-hand engine and pylon detached from the airplane during takeoff. Emergency AD 2025-23-51 prohibited further flight until the airplane is inspected and all applicable corrective actions are performed using a method approved by the FAA. Since the FAA issued Emergency AD 2025-23-51, the FAA has determined additional airplane models are subject to the same unsafe condition. This emergency AD continues to require the actions in AD 2025-23-51 and adds the Model MD-10-10F, MD-10-30F, DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10- 30F (KC-10A and KDC-10), DC-10-40, and DC-10-40F airplanes to the applicability. The FAA previously sent an emergency AD to all known U.S. owners and operators of these airplanes. The FAA is issuing this emergency AD to address the unsafe condition on these products.

The FAA is superseding Airworthiness Directive (AD) 2020-03- 20, which applied to certain The Boeing Company Model MD-11, MD-11F, and 717-200 airplanes; all Model 737-8 and 737-9 airplanes; all Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes; certain Model 747-400 and 747-400F series airplanes; certain Model 757 and 767 airplanes; and all Model 777 airplanes. AD 2020-03-20 required revising the existing airplane flight manual (AFM) to include a limitation to prohibit operations that require less than 0.3 required navigational performance (RNP) within a specified area for airplanes having a certain multimode receiver (MMR) with certain software installed. This AD was prompted by reports from Boeing of simultaneous MMR resets related to an error in calculating Coordinated Universal Time (UTC). This AD requires the actions in AD 2020-03-20, removes an airplane model from the applicability, and would also require installing certain MMR operational software (OPS). The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model MD-11 and MD-11F airplanes. This AD was prompted by a report of a Model MD-11F airplane experiencing an uncommanded deployment of a thrust reverser in flight at low altitude. This AD requires initial and repetitive detailed inspections and repetitive wire integrity tests of the engine pylon thrust reverser control system wire harnesses, junction box assembly and junction box cover, left-side and right-side thrust reverser electrical harnesses, core (engine compartment) miscellaneous wire harness assembly, and 30- degree bulkhead wire harness assembly; and applicable on-condition actions. This AD also requires reporting inspection results. The FAA is issuing this AD to address the unsafe condition on these products.