Boeing 727

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 707, 717, and 727 airplanes; Model DC-8, DC-9, and DC-10 airplanes; Model MD-10 and MD-11 airplanes; Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 airplanes; and Model MD 90-30 airplanes. This AD was prompted by the determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G Lower C- Band) while operating in Canadian airspace, and the determination that during approach, landings, and go-arounds, as a result of this interference, certain airplane systems may not properly function, resulting in increased flightcrew workload while on approach with the flight director, autothrottle, or autopilot engaged, which could result in reduced ability of the flightcrew to maintain safe flight and landing of the airplane. This AD requires revising the existing airplane flight manual (AFM) to incorporate limitations prohibiting certain operations requiring radio altimeter data when operating in Canadian airspace. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is superseding Airworthiness Directive (AD) 2022-09- 18, which applied to all The Boeing Company Model 707, 717, and 727 airplanes; Model DC-8, DC-9, and DC-10 airplanes; Model MD-10 and MD-11 airplanes; Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC- 9-87 (MD-87), and MD-88 airplanes; and Model MD 90-30 airplanes. AD 2022-09-18 required revising the limitations and operating procedures sections of the existing airplane flight manual (AFM) to incorporate specific operating procedures for, depending on the airplane model, instrument landing system (ILS) approaches, non-precision approaches, ground spoiler deployment, and go-around and missed approaches, when in the presence of interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band) as identified by Notices to Air Missions (NOTAMs). Since the FAA issued AD 2022-09-18, the FAA determined that additional limitations are needed due to the continued deployment of new 5G C-Band stations whose signals are expected to cover most of the contiguous United States at transmission frequencies between 3.7-3.98 GHz. This AD requires revising the limitations and operating procedures sections of the AFM to incorporate specific operating procedures for, depending on the airplane model, ILS approaches, non-precision approaches, ground spoiler deployment, and go-around and missed approaches, due to the presence of 5G C-Band interference. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 707 and Model 727 airplanes. This AD was prompted by a report indicating cracking in fastener holes at the center wing box and at certain positions of the rear spar and lower skin on a Model 737-300 airplane. A cross model review determined that similar cracking of the fastener holes in the center wing box lower skin could occur on Model 707 and Model 727 airplanes. For Model 707 airplanes this AD requires repetitive detailed inspections of the center wing box lower skin for cracking and repetitive high frequency eddy current (HFEC) and ultrasonic (UT) inspections of the rear spar lower chord at a certain position for cracking, repetitive sealant application, and repair if necessary. For Model 727 airplanes this AD requires repetitive detailed inspections of the center wing box, lower skin, and rear spar lower chord at a certain location for cracking, repetitive sealant application, and repair if necessary. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 707, 717, and 727 airplanes; Model DC-8, DC-9, and DC-10 airplanes; Model MD-10 and MD-11 airplanes; Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 (collectively described, in the preamble of this AD, as MD-80) airplanes; and Model MD-90-30 airplanes. This AD was prompted by a determination that radio altimeters cannot be relied on to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band), and a recent determination that during approach, landings, and go- arounds, as a result of this interference, certain airplane systems may not properly function, resulting in increased flightcrew workload while on approach with the flight director, autothrottle, or autopilot engaged. This AD requires revising the limitations and operating procedures sections of the existing airplane flight manual (AFM) to incorporate specific operating procedures for, depending on the airplane model, instrument landing system (ILS) approaches, non- precision approaches, ground spoiler deployment, and go-around and missed approaches, when in the presence of 5G C-Band interference as identified by Notices to Air Missions (NOTAMs). The FAA is issuing this AD to address the unsafe condition on these products.